THE J&M MACHINES ACIERA F1 DRILLING ATTACHMENT
This attachment has been some time in the making but is now finally finished and available. Many of you will have seen its progress at the clock and watch fairs and other events that we attend together with the J&M universal bench top milling machine that will be available soon. Made entirely in the UK except for the motor and controller (sadly we could not find anything in the UK that would suit ) The attachment is made up of an inline direct drive quill mounted in a robust casting that fits into the F1 head using the same diameter shaft. The quill has 28 mm of movement and is balanced by an internal spring which can be adjusted for sensitivity . The head can be set up with a engineers square against a datum ground on the casting (see pictures ) a small plate with a line can then be moved to align with the F1 datum line in the top of the head, this will set the quill in the vertical position. Also shown is head over at 45degrees using a bevel protractor. The speed range of the drill is between 2000 and 5750 rpm and the chuck capacity is 4mm. The head also houses an inbuilt led light so the drill is back lit and easier to see the work. The whole unit is easy to set up and use.Built in Britain Built to Last™ The machine weighs in at 4.5 kilos so postage to the UK Royal Mail Special delivery would be £26.60 including packing. Please call us if you require any further information . We also make one for the SIXIS 101 !!
PRICE £900.00
Ask a question