CHRONOS WHEEL AND PINION CUTTING ENGINE

CHRONOS WHEEL AND PINION CUTTING ENGINE

CHRONOS WHEEL AND PINION CUTTING ENGINE

This very popular model has been upgraded by the previous owner with some very useful additions. An 8mm collet spindle is incorporated into the center boss ( which is removable ) and works well with the pinion cutting gallows.The vertical cutting slide pull down handle has been moved to an angled position. An 8mm collet spindle mounted in a horizontal block can be mounted on the top bar instead of the pinion gallows and can be used for cutting crown wheels etc. Other items included are as follows:-

• 4 count plates. DD62, DD63, DDE65R, Pinion plate of 12,10,9,8,7,6
• Fly cutting frame with to spindles
• collet holder and 4 collets
• 3 wheel blank holders.
• selection of small wheel cutter holders.
• 6 Thornton wheel cutters, M1.0w, M0.9w, M0.95w, M0.85w, M0.7w, M0.35w
• 1 Thornton 60 degree ratchet, 1 5e recoil.
• 100 assorted small wheel cutters.
• Small fly cutting holder

The unit is mounted on the Chronos wooden case. The single phase mains motor has had a counter shaft fitted to increase the number of cutting speed options. The motor has a second pulley mounted at the opposite side so the cutting frame or spindle can be mounted either way in the vertical slide. The modifications are to a very high standard and have improved the performance of the basic machine. Please call for any further information. Buyer collects or arranges collection. This will be at the Birmingham clock and watch fair on the 18th July if not already sold.

NOW SOLD