PULTRA 1750 with rising BLOCKS

PULTRA 1750 with rising BLOCKS

PULTRA 1750 with rising BLOCKS

This is an exceptionally well equipped model, ex REME hence the colour scheme of off white and brown, could do with a re-paint. We believe that this had very little use if any. The bed although slightly stained has no marks on the bed this goes for the crosslide as well as most of the surfaces still had the protective grease on them. The headstock bearings have no wear.The crosslide has no wear on the slides and no backlash on the screws. The 40mm rising blocks take the center height to 1790 which gives plenty of scope for larger work. This does not have the clutched mardrive unit but has a 1/2 HP brook  Crompton mains motor cont rated at 1425 rpm, this is mounted on the normal base plate and has the 2 counter shafts for speed variation. The collets as far as we can see still have the protective grease on the threads and have had no use. They are duplicated for some reason so there are 20 sizes. Inventory  as follows:-

• 41 collets from .4 mm – 7.5mm
• 9 extended nose collets from 8mm -16mm
• 5 ring chucks
• 3 jaw chuck
• 12 blank collets
• Center collet
• Catch plate and drive dogs
• Box chuck
• Extended tool holder
• Standard tool holder
• Tip over tool rest
• 40mm rising blocks
• Crosslide
• Back detent divider plate
• lever drilling Tailstock
• Tools and Alan keys

This will require some further cleaning but will make a very good lathe for the Horologist or serious model engineer and will give years of excellent service. Please call if you require any additional information on this lathe. This will be UK  collection only because of the weight.

NOW SOLD