Contact Us

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for otherwise we will not receive a reply.

 

Tel: 01235 763987
Fax: 01235 769828

Browse our site

Reset

TOOLMAKERS CABINET WITH TOP BOX.

TOOLMAKERS CABINET WITH TOP BOX.

TOOLMAKERS CABINET WITH TOP BOX.

A very clean and refurbished toolmakers 10 draw cabinet with pocket for the Machinery Handbook no makers name visible. This measures 560mm X 240mm deep X 480mm high. The top box was added but is matched to the cabinet. Key for the [Read more…]

ACIERA F1 UNIVERSAL PRECISION MILLING MACHINE

ACIERA F1 UNIVERSAL PRECISION MILLING MACHINE

Here we have an early imperial example of this much sought after miller favored by horologists and fine model makers the world over. This one will require striping down for cleaning and a re-paint to get it back to the condition when new. The motor is three phase and [Read more…]

ACIERA F12 UNIVERSAL PRECISION MILLING MACHINE.

ACIERA F12 UNIVERSAL PRECISION MILLING MACHINE.

Here we have an incomplete example of this forerunner of the iconic F1. Despite it`s unkempt appearance underneath the grime and staining is a very useful basis for an accurate horizontal miller. There is little wear in the slides and the handles and the leadscrews are not bent. The [Read more…]

CLARKSON MKII TOOL AND CUTTER GRINDER

CLARKSON MKII TOOL AND CUTTER GRINDER

CLARKSON MKII TOOL AND CUTTER GRINDER

This ex – technical college machine is in excellent condition and comes with a good range of equipment including the pair of centers and the universal head as shown in the pictures and is three phase. we are posting this for [Read more…]

THIEL PRODURO DIE FILLER

THIEL PRODURO DIE FILLER

THIEL PRODURO DIE FILLER

This is one of the best die fillers around. Built to a very high standard it has variable stroke and speed with both being adjustable whilst running. The table can be set in two planes so compound angles can be produced. This machine is [Read more…]

PULTRA 1750 10MM BENCH LATHE

PULTRA 1750 10MM BENCH LATHE

A well equipped clean bench model which just needs mounting on a bench with the Mardrive unit to be used straight away. The Mardrive is single phase 240 volt with switch gear and clutch and brake pedal. Comes with the following equipment:-

Set of 24 metric collets from .4 – [Read more…]

UNIMAT THREE WITH MILLING/DRILLING ATTACHMENT

UNIMAT THREE WITH MILLING/DRILLING ATTACHMENT

UNIMAT THREE WITH MILLING/DRILLING ATTACHMENT

A clean used example of this well know lathe that is always popular with Model Makers, Horologists etc. Has some oil staining on the bed but is otherwise in very good condition. Comes with the following inventory of equipment:-

3 jaw reversable chuck [Read more…]

EMCO SMALL MACHINE VICE

EMCO SMALL MACHINE VICE

This small machine vice has overall dimensions of 85mm long X 45mm wide X 34mm height. The jaws open to 31mm by 17mm deep, the static jaw has horizontal and vertical V cuts so round objects can be held easily. The vice has some oil and grease staining but is otherwise [Read more…]

TRIPLE CROSSLIDE

TRIPLE CROSSLIDE

TRIPLE CROSSLIDE

A rare American HR triple crosslide that would suit WW pattern lathe beds. This is very similar to the Derbyshire and Webster Whitcomb makes. The chrome plating has aged a little and there is very slight flaking on one edge, there is a slight cut mark on the topslide (shown) but would not [Read more…]

4 JAW CHUCK

4 JAW CHUCK

A very clean 59mm diameter 4 jaw independent chuck with a 12 x 1mm internal thread and register, would suit a late Cowells lathe. Comes with a key. Will Post UK only Royal Mail Special delivery for £10.00 including packing.

 

NOW SOLD

[Read more…]