Contact Us

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for including a contact number otherwise we will not be able to reply.

Tel: 01235 763987

Bushing Tool required, K W M or Bergeon would be ideal, as complete as possible with cutters broach`s, gauge and bushes in good condition.  Money waiting for the best example. Also Chronos/Boyle/Corrie or any wheel or pinion cutting engines,  Money awaits the best example.

 

Search Categories



FOR SALE

WOLF JAHN 6.5 mm WATCHMAKERS LATHE

WOLF JAHN 6mm WATCH MAKERS LATHE

A very clean and well equipped example of this well known German maker. This model comes with a separate mandrel headstock and short relived D bed. In its original box with the following inventory of quality accessories it represents very good value to a first time buyer. Buyer collects [Read more…]

Maker: | Category: Horological, Horological Lathes, Lathes, Metalworking, Model Making Lathes | Ask a question

SMALL GEAR AND PINION CUTTING MACHINE

SMALL GEAR AND PINION CUTTING MACHINE

SMALL GEAR AND PINION CUTTING MACHINE

This home constructed gear and pinion cutter machine has been made from a 6 mm Wolf Jahn D bed lathe. The blank gear to be cut is mounted directly on the count plate, then centered up. A suitable cutter mounted on an arbor is held between the headstock and [Read more…]

Maker: | Category: home constructed, Horological, Horological Wheel & Pinion Engines | Ask a question

WOLF JAHN 4 AXIS PRECISION WATCHMAKERS MILL

WOLF JAHN 5 AXIS PRECISION WATCHMAKERS MILL

WOLF JAHN 4 AXIS PRECISION WATCHMAKERS MILL

WOLF JAHN 4 AXIS PRECISION WATCHMAKERS MILL

This very clean example of this high precision bench top mill is ideally suited for the watchmaker or for small model making where accuracy needs to be guaranteed. Will need a suitable motor to drive the 3 step pulley, [Read more…]

Maker: , | Category: Horological, Horological Millers, Millers, Model Making Millers | Ask a question

WOLF JAHN VERTICAL SLIDE

WOLF JAHN VERTICAL SLIDE

This 8 mm model has 50 mm vertical movement , the spindle block can rotate 360 degrees so any cutting angle can be achieved. The base is also able to rotate around its single clamping point. The nickle plating is a little worn in some areas but is in very good [Read more…]

Maker: | Category: Horological, Horological Lathes, Lathes, vertical slides | Ask a question

WOLF JAHN 6.5 MM WATCHMAKERS LATHE

WOLF JAHN 6.5 MM WATCHMAKERS LATHE

This single foot model of this famous German marquee comes with two headstocks one standard and one with a screwed nose that accommodates a three jaw drill chuck that would have probably used for polishing or lapping. It has an extensive range of accessories that are fitted into a [Read more…]

Maker: | Category: Horological, Horological Lathes, Model Making, Model Making Lathes | Ask a question