Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Contact Us

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for otherwise we will not receive it.

Tel: 01235 763987
Fax: 01235 769828

 

Browse our site

Reset

THE J&M MICRO PRECISION DRILL

THE M&J MICRO PRECISION DRILL

THE J&M MICRO PRECISION DRILL

A new edition to the range of small precision machines from J&M Machines. This has been designed to fit D bed and WW pattern lathe beds but can be adapted to fit most small lathes. From the pictures you will see that it […]

THE J&M MACHINES SIXIS 101 DRILLING ATTACHMENT

THE J&M MACHINES SIXIS 101 DRILLING ATTACHMENT

To our knowledge this is the only available drilling attachment for the SIXIS 101. This has the same specification as the J&M machines ACIERA drilling attachment, except for the spigot size (55mm rather than 40mm ) and the casting for the unit which has to be larger to […]

THE J & M MACHINES ACIERA F1 DRILLING ATTACHMENT

THE J&M MACHINES ACIERA F1 DRILLING ATTACHMENT

This attachment has been some time in the making but is now finally finished and available. Many of you will have seen its progress at the clock and watch fairs and other events that we attend together with the J&M universal bench top milling machine that will be […]

GERMAN PIVOTER JACOT TOOL

GERMAN PIVOTER JACOT TOOL

This offset Jacot tool has had good careful use. All the pivot plates (including 2 spares ) and drums show no signs of damage or wear. The box bears all the marks of being taken out a draw and replaced many times. No makers marks on the tool but finished to […]

8mm MANDREL PLATE & CENTRE

8mm MANDREL PLATE & CENTRE

Although not marked this is very much in the Pultra style. we have resurfaced the plate, One of the dogs has a slight rub mark on the top edge but all the gripping surfaces are unmarked. The pull back centre point is sharp and the guide bush allows the pin […]

L & R DEMAGNETIZER

L & R DEMAGNETIZER

L & R DEMAGNETIZER

Does Exactly what it says on the box, American made by L&R Kearney New Jersey. Mains (240 volt) powered and in full working order with instructions on the underside of the box. Can be used for whole watches as well as small parts, very easy to use. Will post Royal Mail […]

WATCHMAKERS DEPTHING TOOL

WATCHMAKERS DEPTHING TOOL

Good quality depthing tool in clean wooden case, points and centres in excellent condition, pins in line. Will post UK only Royal mail special delivery including packing for £10.00.

NOW SOLD

CHRONOS WHEEL CUTTING ENGINE

CHRONOS WHEEL CUTTING ENGINE

CHRONOS WHEEL CUTTING ENGINE

A standard Chronos wheel cutting engine (No 153) mounted on its original base and box cover. Comes with 2 count plates a DD62 and DD65 with center spindles and wheel holders and a second small cutter frame. The motor is 240 Volt single phase with a 3 speed pulley. This will […]

PUNCH AND STAKE SET

PUNCH AND STAKE SET

PUNCH AND STAKE SET

A mint condition 24 piece punch and stake set for fine work. The stake diameter is 2.99mm and they are in a unmarked wooden box. Will post UK only Royal Mail Special Delivery including packing for £8.50.

PRICE £ 28.00

[…]

HIGH PRECISION WATCH MAKERS DRILL

HIGH PRECISION WATCH MAKERS DRILL

HIGH PRECISION WATCH MAKERS DRILL

A very clean high precision drill with sensitive feel, no makers name on it but looks like Hauser or Dixi origin. The height of the drill is 14″ and has a single grooved pulley so would benefit from a variable speed motor, drive belting will be supplied. The table can […]