FOR SALE
|
SMALL INDEXING HEAD This small indexing unit only measures 2 1/4″ X 1 1/4″ x 2 1/42 high and would fit well on any high precsion mills such as the Aceria F1 or the Sixis or any other smaller millers. Made to a very high standard ( We have not been able to identify a [Read more…] 
LARGE DEPTHING TOOL This depthing tool probably French is larger than average and in good condition. Dimensions are as follows from the center points to the frame is 57 mm, maximum distance between centers is 65mm, so will take up to a 4 1/2″ wheel, minimum distance between centers is 9mm. all points are in [Read more…] 
BERGEON MAINSPRING WINDER No 30076 One of the best there is. In its original box its used but in very good condition. Buyer collects or arranges collection. NOW SOLD 
LORCH JUNIOR 8mm WATCHMAKERS LATHE A good example of this model very quite running lathe ( fitted with a PAPST motor that is also fitted to the Boley F1 ). The feed screws on the crosslide are reversed (They turn right instead of left). The 240 volt single phase motor has an is controlled by [Read more…] 
MEDIUM SIZE DEPTHING TOOL A used medium size depthing tool proberbly of French manufacture again in its original box. This one has also lost its polish but is in good usable condition. Size between points is 1 3/4″ 43 mm an dthe distance between frame and points is the same. Needs a good clean and [Read more…] 
K. W. M. BUSHING TOOL A very well equiped example of one of the best available bushing tools around today. Comes with a large quintity of bushes (KWM & Bergeon) plus the 2 sets that come with the machine, has 12 cutters, pin chuck, some home made tooling, a very crisp pivot guage spares and [Read more…] 
BERGEON 2021 WATCHMAKERS VICE New old stock, absolutly mint condition with original box and packing with bench mounting plate ( will need to be cut in bench ) for fast detachment. proberbly the best prcision bench vice around. Will be at the midlands clock fair. NOW SOLD 
MEDIUM DEPTHING TOOL A used medium sizes depthing tool proberbly of French manufacture and in its origonal box. This has lost its polish but is otherwise accurate and full working order. Size between center points is 1 3/4 43mm and the distance between the center and the fame is the same. Male and female centers [Read more…] 
J M WILD DEPTHING TOOL A very clean example and in excellent condition of this well known depthing tool by Malcolm Wild. Comes in its original box with 2 trumpet runners a spare centre etc. The maximum width between centres is 50mm (2″) and is 50mm from centre to base of frame. All points are [Read more…] 
BERGEON 8 MM STANDARD A SET A completely original model with everything intact. This highly desirable lathe from the Bergeon dynasty is being sold on behalf of one of our watchmakers clients and has been treated with respect that it deserves. Comes with the following :- Crosslide with standard tool holder 3 Jaw chuck with [Read more…] |
|
|
Copyright © 2024 Pennyfarthing Tools Ltd - All Rights Reserved | Design: Macwiz Powered by WordPress & Atahualpa |
||
