Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Contact Us

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for otherwise we will not receive it.

WE WILL BE OFF LINE THIS WEEKEND AS WE ARE UPGRADING OUR SYSTEMS FOR OUR NEW SECTION OF THE WEBSITE WHICH WILL BE DEDICATED FOR  THE RANGE  JM MACHINES.

 

Tel: 01235 763987
Fax: 01235 769828

 

Browse our site

Reset

CLINOMETER BY MAKERS MECHINSMS LTD

CLINOMETER BY MAKERS MECHINSMS LTD

CLINOMETER BY MAKERS MECHINSMS LTD

A mint condition 0-10 degree clinometer with divisions on the level at 30 minutes. Box Marked AM 1944. Made in Britain Built to Last™. Will post UK only Royal Mail Special Delivery for £12.00 inc packing or buyer collects or arranges collection.

NOW SOLD

[…]

MOORE AND WRIGHT PRECSION LEVEL

MOORE AND WRIGHT PRECSION LEVEL

MOORE AND WRIGHT PRECISION LEVEL

The level is in as new condition a small chip on the edge of the box and one lock clasp missing, the level is 165 mm long. post and packin UK only by Royal Mail Special Delivery will be £11.00 or buyer arranges collection. Built in Britain Built to Last™

NOW SOLD

[…]

MEDIUM DEPTHING TOOL

MEDIUM DEPTHING TOOL

MEDIUM DEPTHING TOOL

A used medium sizes depthing tool proberbly of French manufacture and in its origonal box. This has lost its polish but is otherwise accurate and full working order. Size between center points is 1 3/4 43mm and the distance between the center and the fame is the same. Male and female centers […]

DEPTHING TOOL

DEPTHING TOOL

A meduim to large size dething tool made from aluminuim castings, very well constructed and comes with an assortment of runners including trumpet and large centre. the maximum distance between runners is 2 1/2″ 65 mm and from the cenre to base of frame is 2 1/4 ” 55 mm maximum lengh of […]

MEDIUM DEPTHING TOOL

MEDIUM DEPTHING TOOL

MEDIUM DEPTHING TOOL

This depthing tool has an overall body length of 180 mm, and has 95 mm between the arm uprights and a 39 mm center height and will take up to 78 m wheel diameters. The maximum distance that the frames can be opened is 60 mm. This looks to be of English […]

LARGE DEPTHING TOOL

LARGE DEPTHING TOOL

LARGE DEPTHING TOOL

A depthing tool with a large capacity and very good condition. With a distance between centers of 115 mm and able to take a wheel of up to 110 mm in diameter and having 62 mm gap between points when open fully, this should be able to cover most large clocks ( […]

Depthing Tool

This older depthing tool has the capacity to take wheels of 80mm in diameter and can be used on small carriage, Bracket and mantel clocks.

SOLD at the Brunel Clock and watch Fair 16 th September

HILGER &WATTS Precsion Engineers Level

HILGER &WATTS Precsion Engineers Level

This well known maker of precsion instruments produced some of the best level and angle mesuring devices in the UK. This 12″ model has the following marked on the level tube.

0.00025″ in 10″ 0.0025 mm/m

Note: we cannot garantee that this calibration is correct.

SOLD

[…]

Depthing Tool

DEPTHING TOOL

A medium size Depthing tool suitable for small carriage, bracket and mantel clocks. This modern example has the ability to take 80mm diameter wheels.

Now sold