FOR SALE
|
BRASS RINGED 3 JAW 6.5MM LATHE CHUCK BRASS RINGED 3 JAW 6.5MM LATHE CHUCK No makers mark on this chuck but could be an early Wolf Jahn or Lorch. Has had some use but is in very good condition with a good smooth action when tightening up. Collet size is [Read more…] 
LEVIN 10mm precision Lathe LEVIN 10mm precision Lathe A rare example of this well known but seldom found American watchmakers/instrument Lathe. This one has seen use and has some staining on the collets and has some nicks on the topslide edge. However the lathe is in good condition and will still give [Read more…] 
KENT MK11 LAPPING/ POLISHING MACHINE KENT MK11 LAPPING/ POLISHING MACHINE A compact machine with dimensions of 49cm x 36cm x 46cm high so would suit a small workshop space. The oscillating head has a set stroke but can be moved to a different position to start its sweep across the polishing plate. [Read more…] 
UPRIGHTING TOOL UPRIGHTING TOOL Avery clean medium sized uprighting tool used in setting up plates in pocket watches etc, points are sharp and true.The tool is usually held in a vice on the square underneath the round plate giving all round access for setting up. Will post royal mail special delivery UK [Read more…] 
FRENCH LARGE DEPTHING TOOL FRENCH LARGE DEPTHING TOOL A large depthing tool in fine original condition. Maximum width between centers is 60mm fully open, minimum width between centers is 7mm. Maximum distance between centers is 100mm. All male center points are sharp and the female centers are unmarked. Will post UK only [Read more…] 
B T M 8mm LEVER DRILLING TAILSTOCK B T M 8mm LEVER DRILLING TAILSTOCK A used but very clean example of this hard to find item for the flat top pattern “D”bed lathe.Very smooth in use with slight tarnish on some of the plating. This has the original draw bar as well [Read more…] 
BRASS DIVIDING PLATES BRASS DIVIDING PLATES Here we have two very well made direct dividing plates that can be adapted to fit most lathes, in fact there is an alloy adapter that fits the larger plate (not shown), we took it off to see if it would fit the smaller plate but [Read more…] 
CINCINNATI MILACRON HIGH SPEED PRECISION DRILL CINCINNATI MILACRON HIGH SPEED PRECISION DRILL A very clean example of this Type P5 high speed drill. Built to a very high specification and of robust construction this will give many years of reliable service. The Rohm keyless chuck has a a capacity from 0-4mm. the [Read more…] 
JKA – FEINTASTER BENCH PRECISION GAUGE JKA – FEINTASTER BENCH PRECISION GAUGE An invaluable workshop measuring gauge for the serious horologist. This is an imperial model in very fine condition, the box has a couple of marks on the varnish but no damage, has been used with care. Please call if you [Read more…] |
SOLD
|
|
Copyright © 2024 Pennyfarthing Tools Ltd - All Rights Reserved | Design: Macwiz Powered by WordPress & Atahualpa |
||
