Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

Contact Us

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for otherwise we will not receive it.

Tel: 01235 763987
Fax: 01235 769828

 

Browse our site

Reset

THE J&M UNIVERSAL MILLING MACHINE

THE J&M UNIVERSAL MILLING MACHINE

We have been showing the machine at various venues in its development phases but we are now pleased to show the finished machine first time on the site, Sorry for the delay but details take time to get right!!

The J&M mill is not just a vertical / horizontal machine […]

JOHN STEVENS UNIVERSAL MICRO MILL & DRILL

JOHN STEVENS UNIVERSAL MICRO MILL & DRILL

JOHN STEVENS UNIVERSAL MICRO MILL & DRILL

This uniqe machine has been constructed from the base of a small bench single operation mill. John has as usual performed his magic to resurrect it to a very useful machine. The footprint is 420mm X 400mm and has a maximum height ( vertical slide extended ) of […]

JOHN STEVENS MICRO MILL

JOHN STEVENS MICRO MILL

JOHN STEVENS MICRO MILL

A rare chance to obtain one of Johns micro mills in as new condition. Built to exceptionaly high standards this mill is one of only two constructed. It comprises of a cast iron base to which the single 6mm tee slotted milling table is attached which has a movement of 120mm […]

MULTICO HIGH SPEED PRECISION BENCH DRILL

MULTICO HIGH SPEED PRECISION BENCH DRILL

MULTICO HIGH SPEED PRECISION BENCH DRILL

A medium sized bench drill and is ideal for drilling or spotting clock plates as it has a large throat depth. The motor is 240 volt single phase driving a flat belt to the quill three speeds are available. Chuck capacity is 0 -5 3/2″ But could be changed […]

I.M.E. HIGH PRECISION WATCH MAKERS DRILL

I.M.E. HIGH PRECISION WATCH MAKERS DRILL

A very clean well maintained example of this exceptional drill. No nibbles in the 3″ diameter table which is adjustable for height. The return spring tension can be adjusted for sensitivity and has a very smooth action. The Quill holds 8mm collets or a small colleted drill chuck can […]

POTTS MILLING AND DRILLING SPINDLE

POTTS MILLING AND DRILLING SPINDLE

POTTS MILLING AND DRILLING SPINDLE

An unpainted example of this home constructed spindle. It can be attached to most vertical slides, lathe crosslides and some wheel cutting engines. The spindle takes 8mm collets and has a two speed pulley. This has seen very lttle use and has no play on the bearings. Made in Britain Built to Lastâ„¢ weighs in […]

PROXON MILL/DRILL COMBINATION

PROXON MILL/DRILL COMBINATION

PROXON MILL/DRILL COMBINATION

This mill drill can be broken down and the motor used as a variable high speed drill or grinder. The combination is made up of the following units:-

BFW mill drill and speed controller. BFB mill drill stand KT compound table A set of 6 collets.

The head can be positioned in […]

JONE & SHIPMAN PRECISION BENCH DRILL

JONE & SHIPMAN PRECISION BENCH DRILL

JONE & SHIPMAN PRECISION BENCH DRILL

JONE & SHIPMAN PRECISION BENCH DRILL

A clean re-painted example of this sort after 2 speed 240 volt single phase drill used by horologist`s , modelers and of course presicion engineers. The last owner has made a new larger table from cast Iron wich measures 200mm x […]

JONES & SHIPMAN PRECISION BENCH DRILL

JONES & SHIPMAN PRECISION BENCH DRILL

JONES & SHIPMAN PRECISION BENCH DRILL

A clean example of this well known make with a maximum capacity of 1/4″ and 1 1/2″ Travel on the quill with micro adjustment on the depth stop. The round table is 7 1/4″ in daimeter and can be adjusted for height , this has a single phase 240 […]

SHERLINE 5100 VERTICAL MILL

SHERLINE 5100 VERTICAL MILL

SHERLINE 5100 VERTICAL MILL

A good clean example of this quality small mill from the USA, This one has metric graduations and comes with the following kit :-

Machine vice Drill Chuck 3/8 end mill holder Slitting saw Arbor Boring head and 2 cutters 2 Fly cutter blocks Draw bars

Table movement is X axis […]