Category: Horological Drills « Pennyfarthing Tools Ltd

You can use the contact form on our “About” page, or use the form below regarding any tool that interests you.
Please make sure you complete all the information asked for otherwise we will not receive it.

This Sunday the 24th November we will be at the West country Clock Fair at the Taunton Travelodge just of the motorway. We will have all of the J&M products as well as our usual range of interesting items as well as a pultra 1750 with a good range of kit and a very clean Unimat 3 with milling attachment. looking forward to seeing customers old and new.

Tel: 01235 763987
Fax: 01235 769828

Categories
Availability

Reset

THE J&M MACHINES SIXIS 101 DRILLING ATTACHMENT

To our knowledge this is the only available drilling attachment for the SIXIS 101. This has the same specification as the J&M machines ACIERA drilling attachment, except for the spigot size (55mm rather than 40mm ) and the casting for the unit which has to be larger to […]

THE J & M MACHINES ACIERA F1 DRILLING ATTACHMENT

THE J&M MACHINES ACIERA F1 DRILLING ATTACHMENT

This attachment has been some time in the making but is now finally finished and available. Many of you will have seen its progress at the clock and watch fairs and other events that we attend together with the J&M universal bench top milling machine that will be […]

HIGH PRECISION WATCH MAKERS DRILL

A very clean high precision drill with sensitive feel, no makers name on it but looks like Hauser or Dixi origin. The height of the drill is 14″ and has a single grooved pulley so would benefit from a variable speed motor, drive belting will be supplied. The table can […]

MULTICO HIGH SPEED PRECISION BENCH DRILL

A medium sized bench drill and is ideal for drilling or spotting clock plates as it has a large throat depth. The motor is 240 volt single phase driving a flat belt to the quill three speeds are available. Chuck capacity is 0 -5 3/2″ But could be changed […]

MEDDINGS HIGH SPEED PRECISION BENCH DRILL

A heavy duty high speed bench drill. The chuck capacity is 0 – 1/4″ but a larger chuck could be fited if required. this model has the following speeds 3000. 4500, and 6000, rpm. The 240 volt single phase motor is housed inside the casting drive is by single […]

I.M.E. HIGH PRECISION WATCH MAKERS DRILL

A very clean well maintained example of this exceptional drill. No nibbles in the 3″ diameter table which is adjustable for height. The return spring tension can be adjusted for sensitivity and has a very smooth action. The Quill holds 8mm collets or a small colleted drill chuck can […]

POTTS MILLING AND DRILLING SPINDLE

An unpainted example of this home constructed spindle. It can be attached to most vertical slides, lathe crosslides and some wheel cutting engines. The spindle takes 8mm collets and has a two speed pulley. This has seen very lttle use and has no play on the bearings. Made in Britain Built to Last™ weighs in […]

GEO.H.THOMAS SENSITIVE DRILL

A very well built example of this popular drill which is firm favorite with horologists and model makers . The footprint of this machine is 375mm X 290mm and 420mm high. The quill travel is 24mm and is fitted with a Jacobs N0 chuck which will take up 5/32 drills. The diameter […]

PROXON MILL/DRILL COMBINATION

This mill drill can be broken down and the motor used as a variable high speed drill or grinder. The combination is made up of the following units:-

BFW mill drill and speed controller. BFB mill drill stand KT compound table A set of 6 collets.

The head can be positioned in […]

JONE & SHIPMAN PRECISION BENCH DRILL

A clean re-painted example of this sort after 2 speed 240 volt single phase drill used by horologist`s , modelers and of course presicion engineers. The last owner has made a new larger table from cast Iron wich measures 200mm x […]