FOR SALE
|
BOYLE WHEEL AND PINION CUTTING ENGINE BOYLE WHEEL AND PINION CUTTING ENGINE The Boyle wheel cutting engine is a robust and larger version of the Chronos style engine. Built in Frome Somerset this is serial No 32. and is equipped with gallows and centers for pinion cutting. The footprint is 24″ X 12″ [Read more…] 
GERMAN PIVOTER JACOT TOOL This offset Jacot tool has had good careful use. All the pivot plates (including 2 spares ) and drums show no signs of damage or wear. The box bears all the marks of being taken out a draw and replaced many times. No makers marks on the tool but finished to [Read more…] 
EMCO 55mm 3 JAW (reversible) CHUCK This will fit the early Unimat and other variants in the Emco range. In used but very good condition and could be fitted to other small lathes.Will post Royal Mail Special Delivery UK only including packing for£9.50. NOW SOLD 
EMCO SMALL MACHINE VICE This small machine vice has overall dimensions of 85mm long X 45mm wide X 34mm height. The jaws open to 31mm by 17mm deep, the static jaw has horizontal and vertical V cuts so round objects can be held easily. The vice has some oil and grease staining but is otherwise [Read more…] 
8mm MANDREL PLATE & CENTRE Although not marked this is very much in the Pultra style. we have resurfaced the plate, One of the dogs has a slight rub mark on the top edge but all the gripping surfaces are unmarked. The pull back centre point is sharp and the guide bush allows the pin [Read more…] 
L & R DEMAGNETIZER Does Exactly what it says on the box, American made by L&R Kearney New Jersey. Mains (240 volt) powered and in full working order with instructions on the underside of the box. Can be used for whole watches as well as small parts, very easy to use. Will post Royal Mail [Read more…] 
BOLEY & LEINEN RING STEP CHUCKS These 5 Boley and Leinen ring step chucks are marked 1,3, and 5, 2and 4 are not. All are marked Boley and Leinen and cover the sizes in the set. They are all in excellent condition. Please call for any further information, The block is not supplied. Will post [Read more…] 
WATCHMAKERS DEPTHING TOOL Good quality depthing tool in clean wooden case, points and centres in excellent condition, pins in line. Will post UK only Royal mail special delivery including packing for £10.00. NOW SOLD 
CHRONOS WHEEL CUTTING ENGINE A standard Chronos wheel cutting engine (No 153) mounted on its original base and box cover. Comes with 2 count plates a DD62 and DD65 with center spindles and wheel holders and a second small cutter frame. The motor is 240 Volt single phase with a 3 speed pulley. This will [Read more…] 
EMCO DIVIDING AND ROTARY TABLE A very versatile piece of equipment allowing direct dividing up to 24 divisions or by using the 3 plates with the worm engaged a large number of divisions can be selected. It can also be used as a rotary table. The diameter of the table is 150mm and the central [Read more…] |
|
|
Copyright © 2024 Pennyfarthing Tools Ltd - All Rights Reserved | Design: Macwiz Powered by WordPress & Atahualpa |
||
