FOR SALE
|
MEIJI TECHNO B.M. MICROSCOPE This Japanese bench microscope with the Griffin badge has X 10 optics with a X 2 multiplier. |It has a mains isolating transformer feeding the low voltage light. The arm can be swung away to proceed with work when not required. Has a heavy stable base , and the focus point [Read more…] 
OVERBECK HIGH PRECISION DRILL This German built high precision drill is designed for small hole drilling and operates with automatic down feed that is controlled by the lever on the left hand side of the machine. The drill is powered by .2 kw mains motor, a speed controller could be fitted such as an inverter [Read more…] 
SMALL GEAR AND PINION CUTTING MACHINE This home constructed gear and pinion cutter machine has been made from a 6 mm Wolf Jahn D bed lathe. The blank gear to be cut is mounted directly on the count plate, then centered up. A suitable cutter mounted on an arbor is held between the headstock and [Read more…] 
JACOT TOOL This used example has no maker name that is visible, it does have the Swiss Cross patent mark and the DRGM patent mark. This was of the best quality and was probabley made of Nickel silver.The beds and pivot holes are small so must have been used for watches or very small time [Read more…] 
MYFORD SUPER SEVEN MYFORD SUPER SEVEN This model of the famous Nottingham marque came to us without a base, we changed that by adding this blasted and powder coated industrial base with the correct switch gear. This machine Serial No SK 168747 has had very little use would suit a keen Horologist, Model [Read more…] 
COWELLS VERTICAL SLIDE COWELLS VERTICAL SLIDE This slide is in as new condition, I would say that has not been used. Comes with two tee bolts & nuts. Now Sold 
ACIERA FI ACIERA FI This well sort after Swiss high precision mill is in need of a good clean and sort out. We are selling this on behalf of a well respected engineer who has had it standing in his Garage for some considerable time. All in working order, the 3 phase motor [Read more…] 
SIGMA JONES JIG BORER SIGMA JONES JIG BORER This well know and early version of the forerunner of the B C A needs a good clean but is otherwise in very good condition. It comes with the counter weighted belt tensioner system. A geared speed reduction unit drives a three speed pulley and [Read more…] 
LORCH 6 MM WATCHMAKERS LATHE LORCH 6 MM WATCHMAKERS LATHE This lathe has had fair use but is in good condition. It comes with the following inventory of equipment in its original wooden box :- 22 collets from .4 – 3.2 mm in .2 mm steps plus a 4.8 and a 5.00 mm [Read more…] 
MULITCO PRO-MEX SCROLL SAW MULITCO PRO-MEX SCROLL SAW This solid no frills model (MS-18) will be able to handle lager work . The throat depth of 440 mm and a table size of 225 x 430 mm with a tilt angle of 30 degrees if required make this attractive for a wide range [Read more…] |
|
|
Copyright © 2024 Pennyfarthing Tools Ltd - All Rights Reserved | Design: Macwiz Powered by WordPress & Atahualpa |
||
