FOR SALE
|
COWELLS 4MM PRECISION BENCH DRILL This is a Cowells bench drill, not a great many about. This one is as new with no visible signs of wear or damage to the table or base. Is 4mm capacity or 5/32 in old money. Runs very well and is variable speed with foot control. It has over [Read more…] 
ACIERA HIGH SPEED PRECISION DRILL ACIERA HIGH SPEED PRECISION DRILL This example of the Swiss engineers art is in excellent condition although a few paint chips are in evidence with the usual bit of oil staining the drill runs perfectly. This is fitted with an Albrecht 0-3mm balanced keyless chuck ( The [Read more…] 
BOLEY RISING TABLE PRECISION DRILL BOLEY RISING TABLE PRECISION DRILL This drill has been modified with a 3 jaw Jacobs 0 – 5/32 drill chuck instead of collets. The motor is a Parvalux DC variable speed 0- 4000 rpm unit with a mains input controller which runs very smoothly and with little [Read more…] 
IME 8mm HIGH PRECISION BENCH DRILL IME 8mm HIGH PRECISION BENCH DRILL An unusual version of this rare drill, comes with a dedicated 2 axis cross slide for fine positioning of components but can be removed to revel the standard round drill table. A new draw bar has been made as it [Read more…] 
DRILL PRESS DRILL PRESS As new condition this 5 speed bench drill is ideal for any hobbyist`s workshop. The chuck will take up to 13mm drills and has 5 speeds 520-2620 rpm, the 240 volt mains motor is rated at 350watts (1/2 hp), quill movement is 50 mm. The weight of the [Read more…] 
SIEG MICRO MILL AND DRILL SIEG MICRO MILL AND DRILL An as new machine, ideal for a model engineer or hobbyist and would be suited to a smaller workshop, good solid construction. Has a digital height gauge built in, fine and course down feeds, variable speed drive 0-3600, 0-5000 .5-6mm chuck capacity. [Read more…] 
TATAR OPTIMA DRILL GRINDER TATAR OPTIMA DRILL GRINDER A fine example of this very accurate Swiss 4 facet drill grinder. This has been refurbished to a very high standard. The 3 phase motor is powered by an inverter so now works directly from the 240 volt mains supply. Has also had new bearings [Read more…] 
HIGH PRECISION WATCH MAKERS DRILL A very clean high precision drill with sensitive feel, no makers name on it but looks like Hauser or Dixi origin. The height of the drill is 14″ and has a single grooved pulley so would benefit from a variable speed motor, drive belting will be supplied. The table can [Read more…] 
I.M.E. HIGH PRECISION WATCH MAKERS DRILL A very clean well maintained example of this exceptional drill. No nibbles in the 3″ diameter table which is adjustable for height. The return spring tension can be adjusted for sensitivity and has a very smooth action. The Quill holds 8mm collets or a small colleted drill chuck can [Read more…] 
GEO.H.THOMAS SENSITIVE DRILL A very well built example of this popular drill which is firm favorite with horologists and model makers . The footprint of this machine is 375mm X 290mm and 420mm high. The quill travel is 24mm and is fitted with a Jacobs N0 chuck which will take up 5/32 drills. The diameter [Read more…] |
|
|
Copyright © 2024 Pennyfarthing Tools Ltd - All Rights Reserved | Design: Macwiz Powered by WordPress & Atahualpa |
||
